By . Architecture. Published at Thursday, June 07th, 2018 - 07:19:23 AM.
How to install bricks. Installation of zero stone. Why is it called stone zero? Because the installation of zero stone is usually done to a zero height in the building of a house or building. A zero stone is mounted on top of a sloof or a continuous foundation, with reference to the pre made floor plan. The zero stones should be installed as accurately as possible to match the drawing of the development plan. Use reference yarn when mounting stones to create a straight and neat pair of bricks. Advanced installation. After installing a zero stone, we can continue the installation of another brick wall above it. This continued installation should also be controlled by reference threads. Provide distance at each meeting between brick and column iron. Iron and bricks should have a minimum distance of 2.5 cm to 3 cm, so that the process of casting the column later can be done well and dense. Do a column casting at a certain height. Do the casting on the column when the height of the brick approximately already reaches 1.2 m to 1.5 m. This is done to prevent the bricks from collapsing, before proceeding to put another brick on it. Casting should also be done when the bricks have dried out.
Deficiency of red brick. Its uniform shape creates difficulties in building a neat wall. Wasteful in the use of adhesive material because it has a large broadcast. Easily absorb the temperature so it feels hot during the dry season and cold when the rainy season. The level of quality can not be known with certainty because it is made traditionally. Improper installation requires the application of thick plastering materials. It has a heavier weight than a lightweight brick so it must be supported by a complex structure. The drying time tends to be longer than other materials.
Disadvantages of plywood. The durability possessed by plywood against extreme weather is continuously no better than solid wood. Plywood is not suitable for use as raw material for making tools and household furniture that is outdoor. Transportation of plywood from the place of purchase to the work site should be done carefully considering the thin size. Sometimes found plywood that has a surface less smooth and wavy. Merging of several plywood sheets should wear a shoot to maximize the result. The level of precision on the thickness side is not good, especially if the surface of plywood is wavy. It takes a high level of accuracy to finishing on plywood so that the results as desired.
Andesite stone is the hardest stone among other commonly used natural stone. Andesite rocks also have small porosity levels because of their porous meetings. This type of stone comes from a volcano and has some recognizable features, which are gray or black. This type of stone has long been used as a building material. The nature of rock solid and resistant to weather and moss, making this stone a favorite to beautify a building and suitable for use in all spaces.
Any content, trademark’s, or other material that might be found on the inspiredpogi.com website that is not inspiredpogi.com’s property remains the copyright of its respective owner/s. In no way does inspiredpogi.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 inspiredpogi.com. All Rights Reserved.